ScriptTimer › Guides

How to write a video script that fits your time limit

Person writing notes in a notebook next to a laptop and a cup of coffee
Plan the structure and word budget on paper before you write the full script.
Quick answerDecide the length first, multiply the minutes by your speaking speed to get a word budget (for example 1 minute × 150 WPM = 150 words), keep 10–15% for pauses and visuals, then write and trim until the calculator shows the right time.

Most timing problems start the same way: the script is written first and measured later. Then the only options are to cut in a hurry or ask the voice to rush. Writing to a time budget from the start avoids both.

1. Set the word budget

Minutes × WPM = maximum words. For a 90 second video at 150 WPM that is 225 words. Subtract 10–15% for music and visuals, so aim for about 195 words. Use the reverse calculator on our home page to get this number instantly for any length and speed.

2. Split the budget by section

SectionShare of time90 s example
Hook5–10%5–8 s, about 15 words
Problem or context15–20%15 s, about 35 words
Main points50–60%50 s, about 110 words
Call to action10%8 s, about 20 words
Buffer10–15%10 s of music or visuals

Writing each section to its own budget is easier than writing one long block. It also shows you early when one part is taking too much space.

3. Structure before you write

4. Write for the ear

5. Measure and trim

Paste the draft into the calculator. If it is too long, cut in this order: repeated ideas, long introductions, adjectives and adverbs, and finally whole sentences that do not change the message. Then read it aloud once; the ear catches what the eye misses.

6. Test with a real read

Record a quick phone read or generate a free AI draft. Put it on your editing timeline under the visuals. If a scene feels rushed, the fix is usually one sentence less, not a faster voice.

✂️ A useful rule: if you have to cut 10%, cut whole sentences. Trimming single words everywhere saves less time than you expect and makes the text harder to read.

Example: from 260 to 200 words

A 90 second product script started at 260 words, about 1 minute 45 seconds at 150 WPM. We removed a two-sentence company introduction (28 words), a second example that repeated the first (22 words) and a list of five features reduced to the three that matter (10 words). The result was 200 words, 1 minute 20 seconds of speech and 10 seconds of space for the logo and music.

Time your script now →

Sources

  1. VirtualSpeech: Average speaking rate and words per minute (citing the National Center for Voice and Speech)

Frequently asked questions

Should I write first or decide the length first?

Decide the length first. Writing to a word budget saves editing time and keeps the video tight.

Is it OK to speed up the voice to fit?

A change of up to about 5% is rarely noticed. Beyond that, viewers hear the rush. Edit the script instead.

Daniel Hughes

Editor at ScriptTimer. Daniel writes our guides on video scripts, speaking pace and voiceover tools, and tests every tool and number we publish with real scripts.

Keep reading